SEARCH - All Listings Miscellaneous Parts

(Used) ONAN 10.0 GENSET 1069 HOURS KUBOTA V1305-E ENGINE DISP 1335CC SERIAL XQ5818 FAMILY SKB1.5U6D2RA CODE 1G281-00000 For more information about this item, give us a call. We ship Worldwide! (CRG HEAVY TRUCK PARTS) 929 W PULASKI HWY ELKTON, MD 21921

50 Gallon Side Mount Steel Reservoir tank. Product is built of tough 13 Ga steel and is designed to install on the side of your truck. ****INCLUDES BRACKETS**** The reservoir is fully baffled to control fluid movement and keep things cool. It features a black powder-coated finish for enhanced corrosion resistance. The tank has a 2 in. NPT return port/drain on its bottom. Each unit includes a sight level and temperature gauge and a quarter turn filler breather unit.

VALVE STYLE HYDRUALIC PUMP 49GPM @ 1800 RPM Factory set rotation is “CCW” (If “CW” is needed it must be specified) 7/8”-13 tooth spline shaft 49 GPM flow at 1800 RPM Max. RPM 2400 Extended studs for support bracket Pre-mounted shift cylinder Dump pumps are not recommended for ejector, conveyor, or moving floor type applications.

25 GAL STEEL SIDE MOUNT HYDRAULIC TANK • 13 gauge H.R.P.O. steel • Welded mounting angles • 1/4 turn chrome filler breather w/basket strainer • Oil level gauge with temperature indicator • Interior baffle between suction and discharge • Large 2" NPT suction ports • Magnetic drain plug • Factory powder coated • Fully tested

NEW DRIVE NON VALVE HYDRAULIC PUMP. Flow Rate: 27 @ 1,000 RPM (U.S. Gallons Per Minute) Input Shaft Diameter: 1.25 (Inch) Input Spline Quantity: Round Keyed Maximum RPM: 3,000 (Revolutions Per Minute) Maximum Working Pressure: 3,000 (Pounds per Sq. Inch) Mounting Type: Remote Pump Type: Gear Rear Port Diameter: 1.25 NPT (Inch) Rotation: Bi-rotational Series Type: L51 Side Port Diameter: 1.5 NPT (Inch) Taxonomy A: Hydraulics Taxonomy B: Gear Pumps Warranty 1 Year

WA102G-RAS AIR SHIFT G Series Direct Mount CW ROTATION 3 Piece Cast Iron Design High Pressure Shaft Seals Factory Set 2000 PSI Relief w/ Load Check Pressure Balanced Thrust Plates Heavy Duty Roller Bearings Two Or Three Line Hook Up 7/8 13 Tooth Spline Shaft 15 GPM at 1000 RPM to 37 GPM at 2400 RPM

NEW DIRECT DRIVE NON VALVE HYDRAULIC PUMP. BI-ROTATIONAL NPT 2 1/2'” gear Parker 5151 7/8 13 Tooth Spline Shaft 4 Bolt Flange, Doweled Construction, Extended Studs 24-Gal Min 1000 RPM to 55 GPM at 2100 RPM, 3000 PSI 1 ¼” side & rear ports (NO PIPE PLUGS INCLUDED)

NEW DIRECT MOUNT NON VALVE BI ROTATIONAL PUMP. 13 SPLINE SAE "B" INPUT. Flow Rate at 1200 RPMS 15.588 gpm Flow Rate at 1500 RPMS 19.485 gpm Flow Rate at 900 RPMS 11.691 gpm MAS PSI 3000 Gear Width 1.5" Weight 37.7

USED WILKIE CRANE ASSY, LOOKS USEABLE, HAS A FEW DINGS

K1010 Series 4-Way, 3-Position Feathering Air Valve Kit Kit contains a spring-return, neutral lockout, feathering air valve. Push lock fittings included. Includes durable, DOT approved, 25 ft x 1/4 in. diameter nylon tubing. FOR MOUNTING CONSOLE USE K1010C

NEW DIRECT DRIVE NON VALVE HYDRAULIC PUMP. BI-ROTATIONAL 7/8 13 SPLINE INPUT SHAFT 2500 PSI-27 GPM @ 1000 RPM. 1 1/2 SIDE AND 1 1/2 REAR NPT PORTS. 2 1/2 GEAR SIZE.

GOOD USED TWO LINE WET KIT AND CAB CONTROLS, LESS HYDRAULIC TANK. INCLUDES PUMP, PTO, CONTROLS AND HOSES.

HRV10025 HYDRAULIC INLINE RELIEF VALVE, 1"NPT FITTING SIZE. 3000PSI RATING.

GOOD USED CRANE, DOES NOT INCLUDE SERVICE BED.

NEW PTO FLANGE. DIRECT MOUNT STYLE. FITS MANY CHELSEA AND NEWSTAR APPLICATIONS 641 Series (Replacement for Chelsea 442 Series) 6LS Series (Replacement for Chelsea 221 Series) 828 Series (Replacement for Chelsea 489 Series)

PTO CONVERSION KIT. COMES WITH DRIVE FLANGE, MAINS SHAFT, MOUNTING BOLTS, GASKET AND SEAL. FITS MANY 489 & 825 SERIES PTO'S. REPLACES CHELSEA 32851-16X

Easily convert the Buyers Products HSV075 and HSV100 Selector Valve from manual to air operation. Lets you shift oil flow from one application to another while at full pressure. Ideal for dump trucks with pup trailers.

PTO TOWER WITH PUMP AND HOIST CONTROL. COMBO KIT.

Console for K1010 Series Air Valves. The Console for K1010 Series Air Valves by Buyers Products works with both the K1010AS and the K1010FAS

BAV040 4-Way, 3-Position Air Valve (Valve Only)

RD-405-R-4 FLOW CONTROL VALVE.

Includes 500 Micron Strainer & Chain Works w/ Hydraulic Tanks Stamped “Hydraulic Fluid Only” 6 Self Tapping Screws Mounting Flange w/ 2 Gaskets 1/4 Turn Chrome HYDRAULIC TANK CAP

NEW FRAME MOUNT "L" BRACKET. WORKS WITH MOST UPRIGHT ACROSS FRAME HYDRAULIC TANKS. USE 4 PER TRUCK. USE IN CONJUNCTION WITH UR50MK. PRICE IS PER BRACKET. UR50A UR50S

NEW PTO LIGHT INDICATOR SWITCH. FITS MANY APPLICATIONS S-15550 379652 ***NORMALLY CLOSED*** MOST COMMONLY FOUND ON MUNCIE APPLICATIONS

NEW 20' PTO PULL CABLE. KIT INCLUDED MOUNTING BRACKET, KNOB, AND CABLE. CUT TO LENGTH. 5" TRAVEL